2 μm Doppler wind lidar with a Tm: fiber-laser-pumped Ho: YLF laser
K Mizutani, S Ishii, M Aoki, H Iwai, R Otsuka… - Optics Letters, 2018 - opg.optica.org
K Mizutani, S Ishii, M Aoki, H Iwai, R Otsuka, H Fukuoka, T Isikawa, A Sato
Optics Letters, 2018•opg.optica.orgA 2 μm Ho-doped ytrrium lithium fluoride (Ho: YLF) laser end-pumped by a 1.94 μm Tm: fiber
laser was developed. A laser system of a ring resonator oscillator and amplifier was
operated at repetition rates of 200–5000 Hz at room temperature. The Q-switched outputs
were 7.4 W at 5000 Hz and 4.25 W at 200 Hz. Injection seeding was applied to the ring
resonator, and single-mode laser emission was obtained. The Tm: fiber-laser-pumped Ho:
YLF laser was first used for Doppler wind lidar measurements, and wind profiles were …
laser was developed. A laser system of a ring resonator oscillator and amplifier was
operated at repetition rates of 200–5000 Hz at room temperature. The Q-switched outputs
were 7.4 W at 5000 Hz and 4.25 W at 200 Hz. Injection seeding was applied to the ring
resonator, and single-mode laser emission was obtained. The Tm: fiber-laser-pumped Ho:
YLF laser was first used for Doppler wind lidar measurements, and wind profiles were …
A 2 μm Ho-doped ytrrium lithium fluoride (Ho:YLF) laser end-pumped by a 1.94 μm Tm:fiber laser was developed. A laser system of a ring resonator oscillator and amplifier was operated at repetition rates of 200–5000 Hz at room temperature. The Q-switched outputs were 7.4 W at 5000 Hz and 4.25 W at 200 Hz. Injection seeding was applied to the ring resonator, and single-mode laser emission was obtained. The Tm:fiber-laser-pumped Ho:YLF laser was first used for Doppler wind lidar measurements, and wind profiles were obtained up to ranges of about 15 km in a range resolution of 96 m and an integration time of 1 s.
opg.optica.org
Showing the best result for this search. See all results